Mount WebDAV folder on Ubuntu

1. At first install davfs2-1.4.7:

   sudo apt-get install libneon27-dev
   cd ~/Downloads/
   wget http://download.savannah.gnu.org/releases/davfs2/davfs2-1.4.7.tar.gz
   tar xzf davfs2-1.4.7.tar.gz 
   cd davfs2-1.4.7/
   ./configure
   

2. Once davfs2 is installed, confirm that the coda kernel module is loaded on your system with
   lsmod | grep coda
   1. If the module is not loaded, load it with
      modprobe coda
      and do one of the following to make it persistent: add a line to /etc/modules reading "coda"
   2. If the module is not loaded AND the above modprobe fails, recompile your kernel with built-in coda support or a coda module.
   3. If the module is already loaded, proceed to the next step.
3. Try to mount manualy

   sudo mount -t davfs "http://sps.domain.com/folder/Sub Folder" /home/taras/davfs/sps
   Please enter the username to authenticate with server
   http://sps.domain.com/folder/Sub Folder or hit enter for none.
     Username: domain\username
   Please enter the password to authenticate user domain\username with server
   http://sps.domain.com/folder/Sub Folder or hit enter for none.
     Password: 
   

4. Make folder mounted automaticaly:
   Add mount point to /etc/fstab (replace spaces by \040):
   http://sps.domain.com/folder/Sub\040Folder /home/taras/davfs/sps davfs noauto,uid=taras,file_mode=640,dir_mode=755,user 0 0
   Save your credentials to /usr/local/etc/davfs2/secrets (If an item contains one of the characters space, tab, #, \ or ", this # character must be escaped by a preceding \):
   /home/taras/davfs/sps domain\\user password

Flashing ROMs from linux (ODIN alternative)

On device VolumeDown+Power

sudo heimdall flash --recovery ./recovery.img

How To Root Galaxy Nexus I9250 On Android 4.2.2 Jelly Bean (JDQ39) Official Firmware And Install CWM Recovery

Step 1 - Download Android SDK from the Android Developers website and install with USB drivers.
Step 2 - Enable USB Debugging mode in your phone.
Step 3 - Download SuperSU v1.04 (UPDATE-SuperSU-v1.04.zip) and copy it to your sdcard (on the root of it. not in any folders) on your device.
Step 4 - Download CWM 6.0.2.3 (recovery-clockwork-touch-6.0.2.3-maguro.img)
Step 5 - Go into Fastboot Mode on your device by pressing "Volume Down" + "Volume Up" + "Power" keys for a few seconds till you see some text on the screen. This is Bootloader Mode.
Step 6 - Type in the following command and press Enter.

sudo fastboot flash recovery ~/Downloads/Adnroid/recovery-clockwork-touch-6.0.2.3-maguro.img

Step 7: Select recovery from fastboot menu and you’ll be taken to the newly-flashed ClockworkMod recovery.
Step 8: In ClockworkMod recovery, scroll down to “flash zip from SD card” and press the power button to select it.
Step 9: Press the Power button again and select “choose zip from sdcard”.
Step 10: Use Volume keys to navigate to UPDATE-SuperSU-v1.04.zip. Select it by using the Power button and flash it.
Step 11: Once flashing is complete, reboot the device by selecting “reboot system now” from the Recovery menu. The first boot may take some time.

Ubuntu Touch on phone

Установил Ubuntu Touch (Developer Preview) на свой Samsung Galaxy Nexus. Интерес победил) Инструкция здесь: https://wiki.ubuntu.com/Touch/Install?action=show&redirect=TouchInstallProcess Под Ubuntu 13.04 у меня все получилось быстро и без проблем. Пока система слабо юзабельна. Звонить и смски писать можно, ходить в интернет по Wi-Fi тоже. На этом, пожалуй, все) Остальное еще не доделано. Интерфейс красивый и удобный, но пока не очень шустрый. Попутно набросал скрипт для переноса контактов из Google (да, пока синхронизации тоже нет). Скрипт пока сырой (да и вряд ли есть смысл его допиливать), но телефоны и имейлы синхронизирует.

How to use:
1) Export Google Contacts to vCard format
2) run ./Google2Ubuntu_ContactsConverter.sh ~/Downloads/contacts.vcf
3) scp ./data.csv  phablet@192.168.1.168:~/data.csv
4) connect to phone via SSH and do:
phablet@localhost:~$ sudo mv data.csv /usr/share/demo-assets/contacts-data
phablet@localhost:~$ manage-address-books.py create

#!/bin/bash
googleContactsFile=$1

if [ "$googleContactsFile" == "" ];
then
 echo "USAGE: $0 contactFileName"
 exit 1
fi

name="Name"
email1="E-mail 1 - Value"
email2="E-mail 2 - Value"
phone1value="Phone 1 - Value"
phone1detail="Phone 1 - detail"
phone2value="Phone 2 - Value"
phone2detail="Phone 2 - detail"
blank=""
facebookID="FacebookID"
facebookStatus="Facebook Status"
facebookLink="Facebook-link"
Favorite="Favorite"
poBox="poBox"
extendedAddress="extended address"
street_address="street address"
locality="locality"
region="region"
postal_code="postal code"
country_name="country name"

echo "$name,$email1,$email2,$phone1value,$phone1detail,$phone2value,$phone2detail,$blank,$facebookID,$facebookStatus,$facebookLink,$Favorite,$poBox,$extendedAddress,$street_address,$locality,$region,$postal_code,$country_name"| tee data.csv

cat $googleContactsFile | while read line
#head -50 $googleContactsFile | while read line
do
 
 if ( echo "$line"|grep "BEGIN:VCARD" > /dev/null );
 then
  parse=1
  name=""
  email1=""
  email2=""
  phone1value=""
  phone1detail=""
  phone2value=""
  phone2detail=""
  blank=""
  facebookID=""
  facebookStatus=""
  facebookLink=""
  Favorite=""
  poBox=""
  extendedAddress=""
  street_address=""
  locality=""
  region=""
  postal_code=""
  country_name=""
  continue
 fi 
 
 if ( echo "$line"|grep "END:VCARD" > /dev/null );
 then
  parse=0
  continue
 fi 
 
 if [ $parse -eq 1 ]; 
 then
  key="`echo $line |awk -F":|;" '{print $1}'`"
  value="`echo $line |awk -F":" '{print $2}'|sed -e 's/[^a-zA-Z0-9@. +]//g'`"
  
  case $key in
   "FN") name="`echo "$value"|grep -ve '^ *$'`";;
   "EMAIL") if [ "$email1" == "" ]; 
      then 
       email1="$value"; 
      else 
       email2="$value";
      fi ;;
   "TEL") if [ "$phone1value" == "" ]; 
      then 
       phone1value="$value"; 
      else 
       phone2value="$value";
      fi ;;
  esac
  if [ "$name" == "" ]; then continue; fi
  echo "$name,$email1,$email2,$phone1value,$phone1detail,$phone2value,$phone2detail,$blank,$facebookID,$facebookStatus,$facebookLink,$Favorite,$poBox,$extendedAddress,$street_address,$locality,$region,$postal_code,$country_name"
 fi
done | tee -a data.csv